How to maintain aluminium window profiles

- Jul 16, 2018-


How to maintain aluminium window profiles


Aluminium window profiles in use, the movement should be light, push and pull shun its natural; found that there are difficulties do not hard pull hard push, should first eliminate the fault. Ash, deformation is the main reason for the difficulty of the aluminium window profiles, to keep the door frame clean, especially the push-pull groove cleaning.


The dust can be sucked out of the groove and the Door seal.


2.Clean aluminium window profiles, people do not step on the aluminum frame, also do not pull the box to support.


3, Aluminium window profiles can be soft cloth stained with water or neutral detergent, do not use ordinary soap and washing powder, but also can not use cleansers, toilet essence, such as cleaning agent of acid and alkali.


 4, After the rainy day, should promptly wipe dry wet glass and door frame, pay special attention to wipe dry chute stagnant water.


The chute is used for a long time, the friction force increases, can add a little oil or paint a layer of fire wax. 5, should often check the aluminum alloy frame connection parts, timely tightening bolts, replacement of damaged parts.


Locating shaft PIN, wind support, ground spring and other aluminium window profiles vulnerable parts, to be constantly inspected, regular lubricating oil to keep clean and flexible.


6, Sealed tops and glass seal is to ensure the aluminium window profiles sealing insulation key structure, such as the fall off to timely repair, replacement. 7, often check the combination of aluminum alloy frame wall, as long as there is loosening very easy to make the framework of the overall deformation, so that doors and windows can not be closed, sealed. So the screw at the junction should be tightened immediately, such as screw footings loosening, the use of epoxy strong glue to adjust a small amount of cement seal solid.