Aluminum Carpet trim is mainly used to smooth the carpet to prevent the edge of the carpet because of people or rain and other factors caused the tilt. If the edge of the carpet is tilted, it is easy to trip the people. So the general large hotels and other places will choose to use carpet trim to cover the carpet to protect the formation. For example, in large buildings. Airport Boarding Corridor Lights public access, if the laying of carpets, must be installed at the interface to use high and low carpet trim. If a large area of carpet in the interior, it is necessary in the carpet with the combination of carpet parts, the installation of carpet-specific flat button or the bar.
This is not just the protection of carpets, but also an indirect protection for others. And the carpet trim has a very good surface wear-resistant and mute effect, put the carpet trim of the carpet looks more a luxurious aesthetic feeling. Not only that, most material of aluminum carpet trim is PVC or aluminum alloy, so its durability, the use of a longer period of time, and its construction is also very convenient, no need to invest too much human and material resources.
PVC carpet trim environmental performance is quite good, and its raw materials on the human body and the environment will not have adverse effects.
How to install the aluminum carpet trim although the material is not heavy, the carpet is relatively lightweight to move. However, due to the limitations of the use of occasions, so many people will not be exposed to such hardware, so many people on the "carpet is how to install" The problem will be more headaches.
Here is a brief introduction to how to install the carpet to be installed to the two carpets are connected together: The carpet and the joints of the joint clearance clean, the glass into the gap in the shell, and then two different carpet end placed into the shell, with a small hammer gently beat several times.
The idea is to get rid of the small bubbles, and the second is to make the two more tightly knit.